General Projector Setup

These instructions will help you setup most classroom LCD projectors on LTU.  

  1. Have both your laptop and the projector turned off.
  2. Use the SVGA cable from the A/V station on the wall to connect the projector to your laptop's external video port.  Turn on the laptop.
  3. To turn the projector "ON", point the remote control towards the projector while pressing and holding the "Power" button. 
  4. To turn the projector "OFF", point the remote control towards the projector while holding the "Power" or "Off" button and follow the prompt on the screen.  You will either need to 1.) hold down the power or off button (5 seconds) or 2.) press the power button down twice or 3) press "enter"